Quickspecs, Hp z800 workstation supported components – HP Z800 User Manual
Page 6

320 GB 7,200 rpm SATA 3.0 Gb/s with NCQ 3.5"
Hard Drive
Y
Y
FH963AA
500 GB 7,200 rpm SATA 3.0 Gb/s with NCQ 3.5"
Hard Drive
Y
Y
PV943A
See note
1
1 TB 7,200 rpm SATA 3.0 Gb/s with NCQ 3.5" Hard
Drive
Y
Y
GE262AA See note
1
160 GB 10K rpm SATA with NCQ 2.5" Hard Drive
Y
Y
EW222AA See note
1
300 GB 10K rpm SATA with NCQ 2.5" Hard Drive
Y
Y
FM802AA
NOTE: 8 port SAS Controller included on the system board
Hard Drive
Controllers
Factory
Configured Option Kit
Option Kit
Part Number Support Notes
Factory integrated RAID on motherboard for SATA drives
RAID 0 Configuration - Striped Array
Y
Y
See note 1
RAID 0 Data Configuration -- Boot/OS Drive + 2
Drive Striped Array
Y
Y
See note 2
RAID 1 Configuration - Mirrored Array
Y
Y
See note 3
RAID 10 Configuration - Striped/Mirrored Array
Y
Y
RAID 5 Configuration - Parity Array
Y
Y
See note 3
Integrated SATA 3.0 Gb/s Controller
Integrated SATA 3.0 Gb/s Controller, RAID 0,
1, 10, 5 supported
Y
Y
Integrated SAS controller With RAID 0, 1/1E
Integrated SAS controller With RAID 0 (IS), RAID
1(IM), RAID 10(IME) capability
Y
Y
HP SAS Back Panel Connector kit
HP SAS Back Panel Connector kit
Y
Y
Must have 4 or
fewer SAS hard
drives to
configure this
option
HP SAS Back Panel Bulkhead Connector Kit
HP SAS Back Panel Bulkhead Connector Kit
Y
Y
HP SAS Back
Panel Connector
kit required.
Internal SAS HD
drives are not
supported
LSI MegaRAID® SAS 8888ELP Host Bus Adapter (HBA)
LSI 8888ELP 8-port SAS HW RAID Card
Y
Y
GE258AA
All RAID arrays must be less than 2 TB in size
NOTE 1: Minimum of 2 hard drives needed. All hard drives must be identical
(size/speed/type/bus/functional capabilities). Must have 2, 3 or 4 HD Drives.
NOTE 2: Minimum of 3 SATA hard drives needed. All hard drives must be identical
(size/speed/type/bus/functional capabilities).
QuickSpecs
HP Z800 Workstation
Supported Components
DA - 13278 Worldwide QuickSpecs — Version 2 — 4.13.2009
Page 6