HP Z800 - Manual (Page 51)

HP 22-in-1 Media Card
Reader Description The Media Card Reader device uses the same physical form factor and
mounting as a Floppy Disk Drive. The device connects to a 2x5 two-channel
USB header on the motherboard of the system. There is no USB controller
card provided. Please see the Disc Formats section below for a list of flash
memory card formats that are supported.
Mounting Orientation The Media Card Reader can be mounted in a dedicated Floppy Drive bay (if
the chassis provides one) or in an appropriate Optical Bay adapter. It will
operate in any orientation.
Interface Type USB 2.0 (one channel dedicated to the separate USB port; one channel
dedicated to the flash memory card slots)
Dimensions (WxHxD) 4.9 x 4.0 x 1.0 in (124.5 x 101.6 x 25.4 mm)
Disc Formats xD-Picture
Micro SD
Micro SDHC
SD
SDHC
Mini SD
Mini SDHC
MultiMediaCard (MMC)
Reduced Size MultiMediaCard (RS MMC)
MultiMedia Card 4.2 (MMC Plus, including MMC Plus HC)
Reduced Size MultiMedia Card 4.2 (MMC Mobile, including MMC Mobile
HC)
CompactFlash Card Type I
CompactFlash Card Type II
MicroDrive
Memory Stick (MS)
MagicGate Memory Stick (MG)
MagicGate Memory Stick Duo
Memory Stick Select
Memory Stick Duo (MS Duo)
Memory Stick PRO (MS PRO)
Memory Stick PRO Duo (MS PRO Duo)
Memory Stick PRO-HG Duo
Two additional formats are usable with adapters (not supplied):
MMC Micro
Memory Stick Micro (M2)
HP DX115 Removable
Drive Enclosure Interface Type Compatible with SAS or SATA controllers
Dimensions (WxHxL) 5.81 x 1.62 x 8.08 in (147.6 x 41.1 x 205 mm)
Weight Frame and Carrier: 3.8 lbs (1.73 kg)
Carrier: 1 lbs (0.45 kg)
QuickSpecs
HP Z800 Workstation
Technical Specifications - Optical and Removable Storage
DA - 13278 Worldwide QuickSpecs — Version 2 — 4.13.2009 Page 51