Hitachi ULTRAVISION L55S604 - Manual (Page 38)

38
Setup
Power LED
Select this feature to turn Off or On the Power LED indicator on the
front panel on your TV.
Transparency
This function allows you to change the transparency of OSD based
on 10 levels (0 opaque ~ 10 transparent). Adjust to your own
preference.
Video
Audio
Setup
Channels
Multimedia
Light Control
1 Transparency
HDMI - CEC
Input Labels
Component Options
RGB Options
Reset AV & Setup
Move Select SEL Return Exit EXIT
Press the CURSOR PAD ▲ or ▼ to highlight Transparency. 1.
Press the CURSOR PAD ► or SELECT button. 2.
Press the CURSOR PAD ► to increase or CURSOR PAD 3. ƒ
to decrease the OSD transparency.
HDMI-CEC
Set to On and this feature will enable the HDMI-CEC signal bus
to allow your Hitachi LCD TV to discover and communicate
automatically with other compatible HDMI-interfaced Audio/Video
device. The CEC signal bus makes global controls possible, based
on “plug & play” automation, to minimize the number of IR remotes
and key-presses required for basic operation of your AV device.
Select Off to disable this option.
Video
Audio
Setup
Channels
Multimedia
Light Control
1 Transparency
HDMI - CEC
Input Labels
Component Options
RGB Options
Reset AV & Setup
Move Select SEL Return Exit EXIT
Video
Audio
Setup
Channels
Multimedia
CEC Enable
On
On
On
Device Auto Off
TV Auto On
Move Select SEL Return Exit EXIT
With the “HDMI-CEC” feature, you can interface the connected
device through the HDMI jack automatically if the connected
device meets the“HDMI CEC (Consumer Electronics Control)”
industry standard. Please check if the connected device supports
HDMI CEC before using this feature. For example, here are three
common functions after setting item “CEC Enable” to “On”.
Feature Description
One-Touch Play
(TV Auto On) Pushing the “Play” button on the CEC enabled device will
command the device to play , turn the TV on, and the HDMI
input, that the device is connected to, will become the active
input device for the TV.
System Standby
(Device Auto Off) When the user turns off the TV, all active CEC enabled
devices on the HDMI input will go to Standby.
Playback Control The user can operate the CEC enabled device’s deck
control functions (i.e. Play, Stop,Fast Forward and Rewind)
by the TV’s remote control’s transport keys (ie.
, , and
).
Not all devices with an HDMI connection have the
CEC feature. Consult the instruction manuals for the
device you are trying to control to confirm whether or
not CEC is available.
Input Labels
Use this feature to give a name to any of the nine video inputs
excluding the TV input.
Video
Audio
Setup
Channels
Multimedia
Light Control
1 Transparency
HDMI - CEC
Input Labels
Component Options
RGB Options
Reset AV & Setup
Move Select SEL Return Exit EXIT
Press the CURSOR PAD ▲ or ▼ to highlight Inputs Labels. 1.
Press the CURSOR PAD ► to select your choices. 2.
Video
Audio
Setup
Channels
Multimedia
Input HDMI 1
Name
Select
HDMI 1
Default
Save
Reset
Move Select SEL Return Exit EXIT
Input Labels is Grayed out (Skip) or disabled until you
are on the INPUT that you like to change.
When the Custom option is selected a Keyboard will
appear on the screen to place your desired label.
NOTE
NOTE