Hitachi ULTRAVISION L55S604 - Manual (Page 10)

10
Rear Panel Jacks
HDMI 1 & HDMI 2/DVI (High Definition Multimedia
Interface)
HDMI input for your AV device such as set top boxes or DVD
players equipped with an HDMI output connection.
DIGITAL OUT (Optical Digital Audio)
This jack provides Digital Audio Output for your audio
device that is RAW and PCM compatible, such as an audio
amplifier.
The Digital Output option will grayout with all input
sources, except with a digital program channel on the
Air/Cable input source.
DVI AUDIO Input
This jack provides Audio Input from a DVI device when
connected to the HDMI 2 Input. A DVI (device) to HDMI (TV)
connection must be made to HDMI 2.
It is not neccessary to connect the DVI Audio Input •
when the connection to HDMI 2 is a HDMI to HDMI
connection.
The DVI Audio Input is only compatible with the •
HDMI 2 Input.
COMPOSITE AV1 Jacks
AV1 input provides composite Video and S-Video jacks for
connecting device with this capability, such as a DVD player,
Game Console or Camcorders.
NOTE
7 6 5
4
3
2
1
COMPONENT: Y-P b P r and Audio Inputs
Component 1 and 2 provide Y-P b P r and Audio jacks for
connecting device with this capability, such as a DVD player
or set top box.
Your component outputs may be labeled Y , B-Y, •
and R-Y. In this case, connect the components B-Y
output to the TV’s P b input and the components
R-Y output to the TV’s P r input.
Your component outputs may be labeled Y-C • b C r .
In this case, connect the component C b output to
the TV’s P b input and the component C r output to
the TV’s P r input.
It may be necessary to adjust Tint to obtain •
optimum picture quality when using the Y-P b P r
inputs (see page 31).
AIR/CABLE Terminal
To switch between cable and air, go to the Channels Menu
option to change the signal source Cable or Air (see page
40).
AUDIO OUT Jack
This jack provides stereo audio output from your TV to your
audio device, such as an audio amplifier.
NOTES
NOTES