Hitachi ULTRAVISION L55S604 - Manual (Page 31)

31
ON-SCREEN DISPLA
Y
Video
Audio
Setup
Channels
Multimedia
MPEG NR Off
Gamma 2
Auto
Mid
Auto
20
Gamma
Backlight
Auto Movie
Reel120 Motion
Aspect Ratio
Reset
Move Select SEL Return Exit EXIT
Use the CURSOR PAD 1. , to highlight Reel120 Motion
function.
Press the CURSOR PAD 2. to select Off, Low, Mid, or High.
High: Use this setting for the maximum smooth motion effect.
Mid: Use this setting for a moderate smooth motion effect.
Low: Use this setting for a mild smooth motion effect.
Off: Use this setting if there is noise with the High, Medium
or Low settings.
Please note that the effect may not be immediately
noticeable and the effect depends on the content of
the movie.
Aspect Ratio
Use this function to select the Picture Format Aspect Ratio.
Video
Audio
Setup
Channels
Multimedia
MPEG NR Off
Gamma 2
Auto
Mid
Auto
20
Gamma
Backlight
Auto Movie
Reel120 Motion
Aspect Ratio
Reset
Move Select SEL Return Exit EXIT
Auto Aspect: Automatically adjust the Aspect Ratio depending
on the input signal.
Aspect Modes: Manually select the Aspect Ratio. There are
different aspect ratios available according to the signal in use.
See page 55.
NOTE
Video
Other Video Menu Setting Adjustments
Use the CURSOR PAD or to highlight the function
to be adjusted.
Press the SELECT button or the CURSOR PAD 1. to select the
function settings.
Press the CURSOR PAD 2. or to adjust the function.
Press the MENU button to return to main menu. 3.
Press the EXIT button to quit menu. 4.
Contrast
Use this function to change the contrast between black and white
level in the picture.
Brightness
Use this function to change the overall brightness of the dark areas
of the picture.
Color
Use this function to adjust the level of color in the picture.
Tint
Use this function to adjust flesh tones so they appear natural.
Sharpness
Use this function to adjust the amount of fine detail in the picture.
Color Temp.
Set this to High for cooler color with more blue, set to Medium for a
more natural color or set to Standard for accurate color.
Noise Reduction
The Noise Reduction function automatically reduces
conspicuous noise in the picture without degrading picture
quality. Set Noise Reduction to Off if you see individual blocks
in the picture.
MPEG NR
The MPEG NR (Noise Reduction) function automatically reduces
block noise in the picture without degrading picture quality.
Gamma
The Gamma function allows you to set between three levels of
gamma ratio correction values (Gamma 1, Gamma 2, or Gamma
3) to produce pictures contrast.
Backlight
Adjust the brightness of the Backlight for maximum visibility. It
changes the intensity of the backlight. Increase for bright rooms
and decrease for darker rooms to make the dark areas of the
picture black.
Auto Movie
The Auto Movie function sets the 3:2 pull down detection feature to
Auto or Off. Theatrical movies are shot on film at 24 frames or still
pictures per second, instead of 30 frames or 60 fields like video.
When film is transferred to video for television viewing, the disparity
between the two frame rates must be reconciled. This involves a
process known as 3:2 pull down. When Auto Movie is set to Auto
your Hitachi LCD Television will activate the circuitry for this special
feature to improve video performance when watching interlaced
format film based sources. Set to Off to deactivate this feature.
Reel120 Motion
Hitachi’s advanced video processor can display movies at 120
frames per second. The following settings are available to smooth
the motion of movie sources. Please note that the effect may not
be immediately noticeable and the effect depends on the content
of the movie.