Hitachi ULTRAVISION L55S604 - Manual (Page 15)

FIRST TIME USE
15
Rear Panel Connections
Cables are not included. NOTE
TIPS ON REAR PANEL CONNECTIONS
COMPONENT Y-P ♦ b P r (COMPONENT 1 & 2) or HDMI (1 & 2) connections are provided for high performance DVD players, VCRs etc.
that have this feature. Use these connections in place of the standard video connection if your device has this feature.
For additional information on connecting your other electronic devices, please refer to the device’s owners guide. ♦
Connect only 1 component (VCR, DVD player, camcorder, etc.) to each input jack. ♦
Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV’s P ♦
b
input and the
components R-Y output to the TV’s P r input.
Your component outputs may be labeled Y-C ♦ b C r . In this case, connect the components C b output to the TV’s P b input and the components
C r output to the TV’s P r input.
It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-P ♦ b P r inputs. (See page 31).
When using a HDMI input from a set top box, it is recommended to use a 1080p, 1080i or 720p input signal. ♦
When the HDMI input is a 1080p signal, it is recommended that the length of the cable should be less than 5 meters. ♦
Completely insert all connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back •
will be abnormal if the connection is loose.
Cable plugs are often color-coded. Match colors of plugs and jacks, i.e. connect red to red, white to white, etc. •
NOTES
Outside antenna
or
Cable TV coaxial cable
2-Way
signal
splitter
VCR
STEREO SYSTEM
AMPLIFIER HDTV SET TOP BOX
DVD PLAYER
with Component
Output capability DVD PLAYER
VIDEO GAME
with Composite
video capability
DIGITAL
OUTPUT CAPABILITY
AUDIO OUT
DIGITAL OUTPUT
DVI
To
HDMI
HDMI DIGITAL
OUTPUT CAPABILITY
HDMI
To
HDMI
ANT
IN
V L R
OPTICAL
IN
OUTPUT
Y P b /C b P r /C r L R S-Video
OUTPUT
Video L R
HDMI OUTPUT
AUDIO IN
Before Operating External Video Devices
Connect an external device to one of the INPUT jacks, then press the INPUT button to show the Inputs List. Use the CURSORS ( and
) to select the Input of your choice. Then press the SELECT button to confirm your choice (see page 19).
Example: Selecting the
TV (AIR/CABLE) Input and
highlight “0.TV”.
+ +
Input List
0. TV
1. HDMI 1
2. HDMI 2
3. HDMI 3
4. HDMI 4
5. Component 1
6. Component 2
7. AV1
8. AV2
9. RGB
Move Select SEL Exit EXIT