Honeywell PIR Application Guide for TB7200 and TB7300 Series s 63-4526-01 - Manual (Page 34)

PIR APPLICATION GUIDE FOR TB7200 AND TB7300 SERIES THERMOSTATS
63-4526—01 34
TB-PIR Cover Installation
1. Remove security screw on the bottom of the thermostat cover.
2. Open up by pulling on the bottom side of thermostat. (Fig. 3)
Fig. 5. Removing cover.
3. Insert polarized connector from new cover into PIR female connector located on thermostat base. (Fig. 6)
Fig. 6. PIR connector
4. Snap PIR thermostat cover into place and re-install the security screw. (Fig. 7)
5. Make appropriate parameter settings related to your application within the configuration menu or through the WEBStation-
AX as identified in the thermostat installation instructions.
Fig. 7. Replacing cover.
°C
°F
M21300
PIR
Connector