HP 9000 Server rp7420 - Manual (Page 21)

I/O Buses and Slots Total Hot-plug PCI-X
Slots (133 MHz×64 bits) 15
14 Dual channel slots (1060 MB/s each)
2 Single channel (530 MB/s each)
Maximum I/O Cards
See supported I/O table Mass Storage 8-15
LAN 15
WAN 15
Multi-Function (Mass
Storage / LAN) 15
Additional Interface
Cards 4-15
Electrical
Characteristics AC Input power 200-240V 50/60 Hz
Hotswap Power
supplies 2 total, included with base
Redundant AC power
inputs 2 required, 4 cords for 2N
Typical maximum
power dissipation for
maximum processor,
memory, disk, I/O
configurations 2015 VA (1975 W)
10.08A @200VAC
Marked Electrical per
server 2640 VA (12A @ 220VAC)
Marked Electrical per
line cord 1320 VA (6A @ 220VAC)
Power factor at full
load 0.98 (approximately)
kW rating for UPS
loading
1
3.0
NOTE 1: Represents theoretical maximum power/heat dissipation under worst case conditions,
may increase with future upgrades.
Site Preparation Site planning and
installation included Yes
Depth (inches/mm) 30 in (762 mm)
Width (inches/mm) 19 in (482 mm)
Height (inches/mm/EIA)
Racked 17.5 in (445 mm) 10 units
Weight (lb/kg) 101.6 kg./224 lbs.
QuickSpecs
HP 9000 rp7420 Server
Technical Specifications
DA - 11895 U.S. QuickSpecs — Version 24 — 10/1/2006 Page 21