Humax IR-FOX C - Manual (Page 50)

**
8.2 Software Update
For detailed information on updating software, refer to Chapter 9. Software Update.
8.3 Default Setting
Default Setting restores the product to the default settings.
**
Warning: Please note that once you perform the default setting, all data such as the
channel list and user configured data are deleted.
1. Press the MENU button.
2. Select Installation using the button and
press the OK or button.
3. Enter the password using the NUMERIC(0~9)
buttons.
4. Select Default Setting using the button
press the OK or button.
5. Select Yes and press the OK button to
restore all setting to the factory default. Select
No and press the OK
or BACK button
to return to the previous menu.
6. Confirm again to start loading default setting.
Enter the password using the NUMERIC(0~9)
buttons to perform restoring.
7. When completing the default setting, the
installation wizard will run automatically. For
detailed information about the installation
wizard, refer to the Chapter 3. Installation
Wizard.
**
**
Note: The default password is 0000. If you have forgotten your password, please contact your
local product distributor.
GB 49