Installation – Humax IR-FOX C User Manual
Page 48
**
This chapter describes how to search for channels and a series of procedures.
8.1. Channel Search
If your product is connected to the cable and television, you can search channels manually by
searching parameters, if you know the MUX information.
1.
Press the MENU
button.
2.
Select Installation using the
button, and
press the OK
button. You will be prompted
to enter your password.
3.
Select Channel Search using the
button,
and press the OK
or
button.
1. Frequency
1.
Select Frequency using the
button, and
press the OK
or
button.
2.
Enter the frequency using the NUMERIC(0-9)
buttons and press the OK
button.
2. Symbol Rate
1.
Select Symbol Rate using the
button,
and press the OK
or
button.
2.
Select the symbol rate value using the
button, and press the OK
button.
3.
When you select User Define to set symbol
rate manually, enter symbol rate value using
the NUMERIC(0~9) button.
8. Installation
GB 47