Honeywell FUSION User Manual

Page 113

PAN / TILT / ZOOM

7–11

7.6

PTZ STATUS ON CLOSE

The

PTZ Status on Close is an option that defines the default settings for a PTZ

camera when the controller is not open. This includes activating a Tour, moving to a
preset position or simply leaving the camera as it.

Stay Put

This option leaves the PTZ in its present state.

Start Tour

Starts the Pre-Defined Tour function when the on-screen PTZ
controller is closed. The Tour that will be activated will be the Tour
that is selected.

Go To Preset

Moves to a Selected Preset position when the on-screen PTZ
controller is closed.

7.6.1 ACTIVATING THE PTZ STATUS ON CLOSE OPTION

1. Start by creating a Preset or Tour for the selected camera.

Select

either

Start Tour or Go To Preset.

Press

OK or APPLY to save.