HP C4779x - Manual (Page 13)

13
Using the Device
One Staple, Two Staples, Three
Staples, or Six Staples
Note
The illustration shown is for
Letter/A4. See the printer driver
for different paper sizes.
If the default action is set to One Staple, Two Staples,
Three Staples, or Six Staples, one job or mopies are
stapled with the number of staples indicated from one
to six. All of the staples are placed parallel to the edge
closest to the printer. These are predetermined staple
positions.
Note
When using the Six Staples option, if the paper is
narrower than 8.5 in. (216 mm), the job may have less
than six staples.
Default stapler actions (HP 3000-sheet Stapler/Stacker ONLY) (continued)