HP 8300 - Manual (Page 34)

7. Close the scanner lid.
8. Do one of the following:
Windows
Do one of the following:
–
From HP Solution Center, click Scan Film.
– Press customizable button 1.
Macintosh
From the HP Device Manager, click Scan Film.
9. Follow the onscreen instructions to complete the scan.
10. When finished, remove the template from the scanner glass. Remove the film from
the template.
11. Replace the TMA cover by pressing the tob top tab of the TMA cover into place and
then pressing the bottom tab into place.
12. Place the film templates in the scanner storage slot.
Note The templates can be placed in the storage in any order. The HP icon
on each template should face up.
Scan negatives
The TMA is built into the scanner lid. Slides, negatives, and medium- and large-format
film have their own unique media holders, called “templates.” The templates are
rectangular frames that you can use to optimally place the film for scanning.
1.
Open the scanner lid.
Chapter 5
32 HP Scanjet 8300 series