Technical€specifications, Quickspecs – HP ProLiant DL320 User Manual

Page 25

System Unit

Dimensions

Dimensions (HxWxD)

1.67 x 19.0 x 21.9 in (4.24 x 48.3 x 55.6 cm)

Weight

24.58 lb (11.15 kg)

Fully configured with two
hard drives, four DIMM
modules, and a PCI
expansion board

Input Requirements (per

Input Requirements (per
power supply)

power supply)

Range Line Voltage

100 to 240 VAC

Nominal Line Voltage

100 to 120 VAC/220 to 240 VAC

Rated Input Current

3 A (100 to120 VAC) to
1.5 A (200 to 240 VAC)

Rated Input Frequency

50 to 60 Hz

BTU Rating

870 BTUs/hr

NOTE:

NOTE: The BTU Rating
listed is for the Rated Input
Power of 255W

Power Supply Output

Power Supply Output
Power (per power supply)

Steady State Power

180 W (rated)

NOTE:

NOTE: The maximum expected steady state.

Maximum Peak Power

200 W (2 minutes)

Environmental Operating

Operating

Ambient Temperature

50° to 95° F (10° to 35° C)

Temperature Derating

1.8° F per 984.25 ft to 9,842.5 ft
(1° C per 300 m to 3000 m)

Relative Humidity

10% to 90% (non-condensing)

Maximum wet bulb
temperature

82° F (28° C)

Non-operating Storage

Temperature

-4° to 140° F (-20 to 60° C)

Relative Humidity

10% to 95%

Maximum wet bulb
temperature

84° F (29° C)

Non-operating Shipping

Temperature

-40° to 140° F (-40 to 60° C)

Relative Humidity

10% to 90%

Maximum wet bulb
temperature

86° F (30° C)

Acoustic Noise

Idle
(Fixed Disk Drives
Spinning)

L WAd

L WAd (BELS)

6.1

L pAm

L pAm (dBA)

Operating
(Random Seeks to Fixed
Disks)

WAd

(BELS)

6.2

pAm

(dBA)

QuickSpecs

HP ProLiant DL320 Generation 2 (G2)

Technical Specifications

DA - 11512 North America — Version 30 — April 19, 2005

Page 25