HP SR2122-2 - Manual (Page 9)

SR2122-2 configuration rules
9 SR2122-2 IP Storage Router Release Notes
SR2122-2 configuration rules
SR2122-2 router rules
■ The SR2122’s 2
nd
fibre Channel port (FC2) is not supported as a redundant SAN port for
FC1.
■ Direct connect of the SR2122-2 Fibre Channel ports to any HP storage array is not
supported.
■ The MSR2122 Management port must be in a different subnet than the SCSI Router
Instances.
iSCSI host rules
Operation system rules
■ Linux Clustering is not supported.
■ HP Secure Path for Linux with the MSA1000, RA/MA8000, EMA/ESA12000 and
Enterprise Virtual Arrays is not supported.
■ HP Auto Path for VA/XP for HP-UX, Windows 2000, Windows 2003 and Linux are not
supported.
■ HP Secure Manager on XP and VA is not supported.
■ The MSA1000 is not supported with Secure Path for Windows
Table 1: SR2122-2 Router Rules
Router Rule Maximum
Maximum scsirouter instances per SR2122-2 Router
(and per SR2122-2 Router Cluster)
12
Maximum iSCSI host connections per
SR2122-2 SCSI Router instance
32
Maximum active logical units (LUNs) per SR2122-2 Router 120
Maximum active targets per SR2212-2 Router 120
Table 2: ISCSI Host Rules
iSCSI Host Rule Operating System Maximum
Maximum targets accessed per iSCSI host Windows 2000,
Windows 2003, HP-UX, Linux
120
Maximum active LUNs per target Windows 2000,
Windows 2003, Linux, HP-UX
120