Harbor Freight Tools CENTRAL PNEUMATIC 68128 - Manual (Page 6)

SKU 68128 For technical questions, please call 1-800-444-3353. Page 6
Wear suitable gloves to reduce the 3.
vibration effects on the user.
Use tools with the lowest vibration
4.
when there is a choice.
Include vibration-free periods each
5.
day of work.
Grip tool with both hands as lightly as
6.
possible (while still keeping safe con-
trol of it). Let the tool do the work.
To reduce vibration, maintain tool as
7.
explained in this manual. If abnormal
vibration occurs, stop immediately.
SAVE THESE
INSTRuCTIONS.
SPECIFICATIONS
Maximum Air Pressure 90 PSI
Air Inlet
1/2” -14 NPT
Drive Size 1”
Maximum Speed*
3200 RPM / 557 BPM
(Blows Per Minute)
Average Air
Consumption
10 CFM @ 90 PSI
Recommended Min.
Air Hose
1/2” (Not Supplied)
Torque 2000 ft.-lb.
Speed Settings Three
* Maximum speed at stated maximum air pressure. Ex-
cess air pressure is hazardous and may cause the tool
to exceed stated maximum speed.
Recommended Min. Air Hose: 1/2” (Not Supplied)
INITIAL TOOL SET uP/
ASSEMBLY
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
unpacking
When unpacking, make sure the item
is intact and undamaged. If any parts
are missing or broken, call Harbor Freight
Tools at 1-800-444-3353.
This air tool may be shipped with a •
protective plug covering the air inlet.
Remove this plug before set up.