Causes of wear on the image transfer belt, 7 errors, Noisy black toner cartridge drive clutch – HP Volume 23 User Manual
Page 6
Noisy black toner cartridge drive
clutch
The black toner cartridge drive clutch (CL2) may
make a chattering sound that can occur early in
a printer’s life expectancy. In order to stop the
chattering noise, insert the washer
countermeasure as depicted below. The
washer’s part number is XD1-1108-229CN.
Causes of wear on the image
transfer belt
While the fuser’s life is not dependant on media
size or type (one page of any size or type is
considered one page of life), media size, type,
and printing mode can affect the life
expectancy of the ITB.
For the ITB, letter-sized media or smaller is
considered to be the same size. Media sizes
larger than letter, such as legal-sized media,
decrease the life of the ITB due to the additional
rotations required.
Clutch shaft
In addition, use of the following media types
and printing modes decrease the life of the ITB:
90-tooth gear
•
Best Gloss 1
•
Gloss 2
•
Gloss film
•
Best Heavy 1
Electromagnetic
clutch
•
Best Heavy 2
Washer
countermeasure
•
Best Label
•
OHT
41.7 errors
Black toner cartridge drive assembly
A 41.7 error may be displayed later in the life
of some printers. This error may be caused by
several different factors; please consider the
following:
•
Ensure that the printing media complies with
HP specifications. Refer to the paper media
guide:
•
Separation pads can wear with age and use,
especially with rough media use.
Replacement part numbers are:
–
Tray 1:
RC1-0939-000CN
–
Tray 2:
RC1-0954-000CN
–
Tray 3:
RM1-0827-000CN
•
Pick-up rollers can also wear with age and
normal and rough media use. Replacement
part numbers are:
–
Tray 1:
RC 1-1535-000CN
–
Trays 2 and 3:
RM1-0731-000CN
Drive clutch location
HP Color LaserJet 3500/3700 printer updates
6