beautypg.com

Clock, Oven control, clock and timer, Power outage – Hotpoint RF725GP User Manual

Page 13: Timer, Timer tones, Display messages

background image

Oven Control, Clock and Timer

Clock

The

must be set the

correct time day for the
automatic oven timing functions to
work properly. The time of day
cannot be changed during a TIME

BAKE or CLEAN cycle.

To Set the Clock

Step 1. Press the CLOCK pad.

Step 2. Press INCREASE or
DECREASE

to set the time

day.

Power Outage?

After power outage, when power
is restored, the display will
and time shown will no longer be
correct-for example, after a
5-minute power interruption the

will be 5 minutes slow.

Display

until

is reset.

All other functions that were in
operation when the power went out
will have to be programmed again.

Timer

The timer does not control oven
operations. The maximum setting
on the timer is hours

55

minutes.

To Set the Timer

Step 1. Press the TIMER pad.

Step 2. Press INCREASE or
DECREASE pad to set the amount

time on timer.

The timer will start automatically
within a few seconds

releasing

the pad. The timer, as you are
setting it,

display seconds

60 seconds is reached. Then it will
display minutes and seconds until
60 minutes is reached.

After 60 minutes, it will display
hours

now appears in

display) and minutes

the

maximum time of 9 hours and
55 minutes is reached.

To Reset Timer

Press TIMER pad and then press
INCREASE or DECREASE pad
until desired time is reached.

To Cancel Timer

Press TIMER pad until the word
“TIMER” quits flashing on the
display (about 4 seconds).

Timer Tones

The timer tone is 3 beeps followed
by 1 beep every 6 seconds. If you
would like to remove the one beep
every 6 seconds, press and hold

for 10 seconds.

To return the tone of beep every
six seconds, press and hold

for 10 seconds.

Display Messages

If “door” appears on the display,
the oven door is opened and
needs
to be closed. If “LOCK” appears
on the display, the oven door is in
the locked position. BAKE, BROIL
and COOK TIME cannot be set if
the door is in the locked position.

13