Hitachi VT-FX621A - Manual (Page 50)

50
• Press the STOP button to finish recording.
PROBLEM GUIDE / MAINTENANCE
Problem guide
No power • Make sure the VCR is plugged into an AC outlet.
Remote control doesn't work • Make sure the batteries are fresh, and properly
installed.
Won't record • Safety tab has been removed from cassette (VCR will
automatically
eject
the tape).
Won't play back • Make sure the TV/VCR switch is set to the VCR mode.
• Make sure the TV is set to the VCR channel (3 or 4) or
AUX (if using
direct
audio/video hookup).
Won't make timer recordings • The VCR power must be turned off to activate timer
recording.
• Clock is not set correctly.
• Programs entered incorrectly.
• Programs exceed the length of the cassette. Use the EP
recording
speed
for maximum programming.
• Safety tab has been removed from cassette.
Snowy picture in playback • Snow or picture noise is normal during search, still, and
slow
Playback.
• Head cleaning may be required.
• Tape is worn or of inferior quality - adjust tracking controls.
Snowy picture in normal TV • Check antenna or cable connections.
viewing
Clock shows --:-- • Power has been interrupted - reset the clock.
• Reset the clock.
Erratic VCR display • Push the reset switch with a sharp pointed instrument (pen,
toothipick, etc.)
Maintenance