Copying from one vcr to another vcr (dubbing) – Hitachi VT-FX621A User Manual
Page 48
48
BEFORE YOU BEGIN...
Connect the camcorder's AV output cable to the audio/video jacks on the front of your
VCR.
Remote Control Illustration
1 Press the AVX button on remote control, to display L (line) on the TV display.
2 Press the REC, then PAUSE buttons on the VCR remote control. The VCR will
go into Record/Pause.
3 Press the PLAY button on the camcorder. You will see the camcorder tape
being played on the TV.
4 When you see the part of the Camcorder tape you wish to copy, press the
PAUSE button again to release pause and start copying the camcorder tape.
• Press the stop button to finish recording.
COPYING FROM ONE VCR TO ANOTHER VCR (DUBBING)
Hookup
If you have two VCRs, you may use one VCR to record a tape that is being played back
in the other VCR.