Hitachi VT-FX621A - Manual (Page 16)

16
Switch the RF Channel
When the VCR is on, its video signal can come into your TV on either channel 3 or
channel 4. You need to select the appropriate channel.
• When the power is turned on, press the POWER button to turn it off. Press the PLAY
button on front of the VCR. Pressing the CHANNEL
button alterantes between
RFCH-03 (channel 3) and RFCH-04 (channel 4) in the VCR's display.
Display the channel which is not used by a commercial channel in your area.
ADVANCED CABLE HOOKUP -WITH CABLE BOX [F]
WITH THIS HOOKUP
YOU CAN...
• WATCH AVAILABLE CABLE CHANNELS
• RECORD AND WATCH THE SAME CHANNEL
YOU CAN'T...
• RECORD ONE CHANNEL AND WATCH ANOTHER
ALL CHANNEL SELECTIONS MUST BE MADE AT THE CABLE BOX.
BE SURE TO CONSULT YOUR CABLE BOX MANUAL FOR THE CABLE BOX
OUTPUT CHANNEL.
Hookup F Illustration