Hitachi VT-FX621A User Manual
Page 20
20
[A], [B], [C] or [D])
1 Press the POWER button to turn on the VCR.
2 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
3 Press the GUIDE button. Click to see remote control illustration.
The main on-screen menu will appear on the TV screen.
4 Press the (4) button to select the CHANNEL PRESET operation.
5 Press the (1) button to select the type of receiving setup you have:
cable
Internal or external antenna
Alternate cable (If CATV1 doesn't give you the channels you expect).
6 Press the (2) button.
The VCR will automatically store channels received in your area. It takes about 2 - 3
minutes. After the channels are stored in memory, the channel with the lowest number
appears in the VCR's display.