Hitachi VT-FX621A - Manual (Page 45)

45
control.
PROGRAMMING THE VCR REMOTE TO CONTROL YOUR CABLE BOX
The VCR remote control can be programmed to control many cable boxes that are
remote controlled. YOu can easily change channels.
1 Turn on the cable box.
2 Point VCR remote control toward cable box.
3 Press and hold the "CATV" button.
4 Press the remote button corresponding to your cable box as shown in the set-
up chart. The cable box channel will change to confirm that the remote control
has been set.
Cable Box Press "CATV" and
this
number button
Jerrold 1 1
Jerrold 2 2
Jerrold 3 3
Hamlin 4
Zenith
5
Scientific Atlanta 6
Pioneer 7
Philips
8
Note: If your cable box is not listed on the Set-Up Chart, try all the buttons listed in the chart