Honeywell HD-DVR-1016 User Manual
Page 174
FAQ
160
•
Program read error, bit data is too small. There is a mosaic
displayed on the full screen. Please restart the DVR to solve this
problem.
•
HDD data ribbon error.
•
HDD malfunction.
•
DVR hardware malfunctions.
8. There is no audio when live monitoring.
There are the following possibilities:
•
The audio source is not a power picker.
•
The audio output is not connected to a power speaker.
•
Audio cable is damaged.
•
DVR hardware malfunctions.
9. There is audio when monitoring, but there is no audio when system
enters playback mode.
There are following possibilities:
•
Setup is not correct. Please enable audio function
•
Corresponding channel has no video input. Playback is not
continuous when the screen is blue.
10. Time display is not correct.
There are the following possibilities:
•
Setup is not correct
•
Battery contact is not correct or voltage is too low.
•
Crystal is broken.
11. DVR cannot control PTZ.
There are the following possibilities:
•
Front panel PTZ error
•
PTZ decoder setup, connection or installation is incorrect.
•
Cable connection is incorrect.
•
PTZ setup is incorrect.