Maintenance – Husqvarna 18 ProFlex User Manual
Page 31
English –
29
Dismantling the cutting unit
1. Place the Rider on a level surface.
2. Apply the brakes by pressing down the pedal
and lock using the pushbutton.
MAINTENANCE
8. Hang the belt around the handle.
5. Remove the belt adjuster’s spring.
6. Lift off the belt from the belt pulley.
7. Hook on the belt adjuster’s spring again.
3. Lift up the unit using the lifting lever.
4. Remove the nose.
This manual is related to the following products:
See also other documents in the category Husqvarna Gardening equipment:
- 128LD (71 pages)
- 125B (47 pages)
- HEDGE TRIMMER ATTACHMENT (32 pages)
- 2754 GLS (49 pages)
- 532424761R1 (48 pages)
- 650CRT (28 pages)
- 1200-18 (68 pages)
- 324LD (28 pages)
- 324LD (32 pages)
- Hedge Trimmer 123HD65X (24 pages)
- 96045000410 (45 pages)
- 325L (36 pages)
- 966582101 (56 pages)
- 7021CP (18 pages)
- 11 (56 pages)
- 325HDA65X-Series (24 pages)
- 325HE4 x-series (24 pages)
- 323HE3 (24 pages)
- 326HD60 (24 pages)
- 5521RS (22 pages)
- Viking CA 150 (12 pages)
- 70 LP (8 pages)
- 326ES (32 pages)
- 250R (48 pages)
- 232L (32 pages)
- 227L/LD (32 pages)
- 965921501 (76 pages)
- 250 R (52 pages)
- 7021F (21 pages)
- 965969401 (8 pages)
- 210 C (50 pages)
- 210 C (48 pages)
- 966614401 (72 pages)
- 6022SH (18 pages)
- DRT 900 DRT 900 (29 pages)
- 142 RB (29 pages)
- 380 (9 pages)
- 96143005700 (18 pages)
- T 50RS (21 pages)
- 1200 (35 pages)
- 1200 (40 pages)
- H342SG (10 pages)
- 326R (36 pages)
- 125LDx (23 pages)