Harbor Freight Tools 90692 - Manual (Page 10)

FIGURE G
SAFETY SHIELD (8)
HANDLE (51)
SAFETY SHIELD PLATE (43)
SUPPORT BAR (54)
BOLT
PAN HEAD SCREW (9)
FLAT WASHER (21)
HEX NUT (7)
HEX HEAD BOLT (11)
FLAT WASHER (40)
HEX NUT (39)
OPERATING INSTRUCTIONS
To Adjust The Cutting Tool:
1. Prior to use, the Cutting Tool (31) must be set approximately 1/8” above the
Spindle of the
lathe . Make sure to check at the Headstock and Tailstock of the
lathe. (See Figure H.)
2. The Cutting Tool (31) can be adjusted vertically by loosening the Support Bar
Handles (45) which secure the Lower Vertical Support Bars (46) in place.
(See Figure B.)
FIGURE H
CUTTING
TOOL
(31)
SET SCREW (20)
SOCKET HEAD BOLT
(25)
SKU 90692 PAGE 10