Humminbird WIDE Paramount 3D - Manual (Page 33)

pressing the UP and DOWN ARROW buttons after the Zoom menu is off-screen, the position of
the Zoom box will change, and the upper and lower limits of the Zoom range will be displayed.
To disable Zoom, press the MENU button until the Zoom menu is on-screen. Use the UP
ARROW to highlight Oft, and let the menu time out. The digital depth information is not affected
by Zoom.
When the unit is powered off, the Zoom menu returns to Zoom Off.
Depth Alarm
The Wide 3D Paramount contains an audible alarm to warn you of
shallow water depths. The alarm is adjustable from 2' to 99' of
depth. When the alarm is enabled, an audible alarm is sounded if
the water beneath the boat is equal to or less than the selected
alarm depth. Upon activation, the alarm sounds continuously for
about 5 seconds, and then intermittently to remind you that you are
still in shallow water. A Bird Note T"' will appear on screen to
visually indicate the Depth Alarm has been activated. Additionally,
the Wide 3D Paramount can anticipate quickly changing terrain
and sound the Depth Alarm before the bottom depth actually reaches the preset
alarm depth.
To enable Depth Alarm, press MENU repeatedly until the Depth
Alarm menu is on-screen. The Factory Setting is "Off". Use the
DOWN ARROW to highlight On. The menu will expand to show the
current Depth Alarm setting. Use the UP or DOWN ARROW to set
the desired depth for alarm activation.
Once the menu times out, the Depth Alarm is enabled and an arrow
will remain onscreen which indicates the depth for which the alarm
is adjusted. To further adjust the setting, simply press the UP or
DOWN ARROW. An abbreviated menu appears briefly to indicate
the setting. If the alarm is
sounding and you want to disable it, use the MENU button to bring the Depth Alarm menu on-
screen, and the UP ARROW to highlight "Off". The alarm will stop sounding as soon as any
button is pressed.
The Wide 3D Paramount defaults to Depth Alarm "Off" when powered off; however, the most
recent depth setting is remembered.
Fish Alarm
The Fish Alarm alerts you to the presence of fish, or other targets not
connected to the bottom. The Fish Alarm has 3 different settings which
correspond to the 3 different size fish symbols shown on-screen.
To enable Fish Alarm, press the MENU button repeatedly until the Fish
Alarm menu appears on-screen. The menu shows two options, "Off"
(Factory Setting) and "On". Use the DOWN ARROW to highlight "On"
and the menu further expands to show the 3 alarm options. The
selected setting will be "Large fish only". With this setting, the Wide 3D
Paramount alarms on only those targets which are represented by the