HP Photosmart R927 - Manual (Page 8)

Choose the language
Use to choose the language you want, then
press .
To change the language later, use the Setup menu (see
Using the Setup Menu on page 41 ).
Set the region
Along with the Language setting, the Region setting
determines the default date format and the format of the
video signal for displaying camera images on a
television when connected through an optional
HP Photosmart Premium dock or wireless dock base
(see
Using the Setup Menu on page 41 ).
Use to choose the region you want, then press
.
Set the date and time
1. Use to adjust the highlighted value.
2. Use to move to the other selections and repeat
Step 1 until the date and time are set correctly.
3. Press when the date, time, and format settings
are correct, then press again to confirm.
To change the date and time later, use the Setup
Menu (see
Using the Setup Menu on page 41 ).
Install and format an optional memory card
1. Turn off the camera and open the Battery/
Memory card door.
2. Insert the optional memory card in the smaller
slot as shown. Make sure the memory card
snaps into place.
3. Close the Battery/Memory card door and turn
on the camera.
Always format memory cards before first use.
1.
With the camera turned on, press until appears briefly in the upper right
corner of the Image Display. This indicates you are in Playback.
2. Press to access the Delete sub-menu.
3. Use to select Format Card, then press .
4. Use to select Yes, then press to format the card.
Chapter 1
8