HP Photosmart R927 User Manual
Page 45
●
Set the camera to Macro,
Auto Macro, Normal, or
Infinity focus and
try taking the picture again (see
Using the focus range settings on page 14
●
Set the flash to
Auto Flash or Flash On and set the shooting mode to
Action.
●
Check Image Advice for specific tips (see Image Advice under
).
My image is too bright.
●
).
●
Move back from the subject and use zoom.
●
Adjust Exposure Compensation (see Exposure Compensation under
●
Use Bracketing for exposure (see Bracketing under
).
●
Check Image Advice for specific tips (see Image Advice under
).
My image is too dark.
●
Wait for natural lighting conditions to improve, use the flash (see
) or add indirect lighting.
●
Adjust Exposure Compensation (see Exposure Compensation under
●
Use Bracketing for exposure (see Bracketing under
).
●
Use Adaptive Lighting (see Adaptive Lighting under
).
●
Use the Spot setting for AE Metering (see AE Metering under
).
●
Check Image Advice for specific tips (see Image Advice under
).
My image is grainy.
●
Use a lower ISO Speed setting (see ISO Speed under
.
●
Add indirect lighting, use the flash (see
), or wait for
natural lighting conditions to improve.
●
If the camera is warm, the effect will diminish as the camera cools. For best image
quality, avoid storing the camera in very hot locations.
●
Use Image Advice (see Image Advice under
).
Images are missing on my camera.
Remove the memory card and see if the images are stored in internal memory.
The Power light is on but the Image Display is off, or the camera seems stuck and
won’t operate.
●
Press Live View/Playback
to reactivate the Image Display.
●
Reset the camera (see
Resetting the camera on page 43
).
HP Photosmart R927 Digital Camera
45