Quickspecs – HP COMPAQ 6005 User Manual
Page 9
Microtower and Small Form Factor
Maximum Memory
*
Supports up to 16GB of un-buffered non-ECC DDR3 SDRAM.
The DIMM connectors for Channel A slot 3 and Channel B slot 4 are black and these slots
must always be populated first in the channel. Not all possible memory configurations are
represented in the table below.
NOTE: For systems configured with more than 3GB of memory and a 32-bit operating
system, all memory may not be available to the OS due to system resource requirements.
Addressing memory above 4GB requires a 64-bit operating system.
Total Memory
DIMM Slot Population
Channel A
Channel B
1 (white)
3 (black)
2 (white)
4 (black)
1-GB
(Single Channel)
1GB
2-GB
(Dual Channel)
1GB
1GB
3-GB
(Dual Channel)
2GB
1GB
4-GB
(Dual Channel)
2GB
2GB
4-GB
(Dual Channel)
1GB
1GB
1GB
1GB
8-GB
(Dual Channel)
2GB
2GB
2GB
2GB
16-GB maximum
(Dual Channel)
4GB
4GB
4GB
4GB
Expandability
Microtower
Small Form Factor
PCI slots
1 full-height
1 low-profile
Max power per slot
35W
35W
PCIe x1 slot
2
2
Max power per slot
10W
10W
PCIe x16 slot
1 full-height
1 low-profile
Max power per slot
75W
35W
External Bays
3.5"
1
1
5.25"
2
1
IDE
Internal 3.5" HDD Bays
2
1
Hard Drive Controller
(SATA) Supported
SATA
SATA
Hard Drive Interfaces
Supported
SATA 3.0Gb/s
SATA 3.0Gb/s
QuickSpecs
HP Compaq 6005 Pro Business PC
Standard Features and Configurable Components (availability may vary by country)
DA - 13412 Worldwide QuickSpecs — Version 6 — 10/14/2009
Page 9