Task 9: configure feature key (optional), Task 9: configure feature key (optional) –15, Figure 2–8 – HP 958-000290-000 User Manual
Page 41: In the
edge switch 2/32 installation guide
2-15
Installing and Configuring the Edge Switch 2/32
Figure 2–8: Switch Hardware View page
4. Inspect switch status at the Hardware View page and perform one of the
following steps:
a.
If the switch displays operational (no FRU alert symbols and a green circle at
the alert panel), go to “
Task 11: Set Switch Date and Time
” on page 2–21.
b.
If switch operation displays degraded or a switch failure is indicated (FRU
alert symbols and a yellow triangle or red diamond at the alert panel), refer to
the hp StorageWorks edge switch 2/32 service manual to isolate the problem.
Task 9: Configure Feature Key (Optional)
Perform this task to display or install operating features that are available as
customer-specified options. Available features include the:
•
Open systems management server (OSMS)