HP 958-000290-000 - Manual (Page 28)

2-2 edge switch 2/32 installation guide
Installing and Configuring the Edge Switch 2/32
Task 6: Configure the Switch to the
HAFM Application Required if Task 5: HAFM Server
(Optional) task was done.
2–13
Task 7: Record or Verify HAFM Server
Restore Information Required if Task 5: HAFM Server
(Optional) task was done.
2–13
Task 8: Verify Switch-to-HAFM Server
Communication Required if Task 5: HAFM Server
(Optional) task was done.
2–14
Task 9: Configure Feature Key
(Optional) Optional—configure if a feature key is
ordered by the customer. 2–15
Task 10: Configure OSMS or FICON
Management Server (Optional) Optional—configure if the HAFM
server is installed.
2–19
Task 11: Set Switch Date and Time Optional 2–21
Task 12: Configure the Edge Switch
2/32 Product Manager Applications Required 2–23
Task 13: Test Remote Notification
(Optional) Optional 2–50
Task 14: Back Up HAFM Configuration
Data Required 2–51
Task 15: Configure the Switch from the
Embedded Web Server (Optional) Optional—if not done, then the switch
should be configured using the HAFM
server. 2–51
Task 16: Cable Fibre Channel Ports Required 2–69
Task 17: Connect Switch to a Fabric
(Optional) Optional—perform this task to connect
the switch to a fabric. 2–69
Task 18: Unpack, Inspect, and Install
the Ethernet Hub (Optional) Optional—install only if ordered and
Ethernet segment does not exist to
connect switches and the
HAFM
server.
2–71
Table 2–1: Installation Task Summary (Continued)
Task Number and Description Required or Optional Page