Hitachi Koki USA DDC 35n - Manual (Page 84)

5.2 Loading the AppleTalk NIManage Utility Program
5-2
Ap
ple
T
alk
Co
nfi
gur
ati
o
n
Cha
p
ter 5
10. The options available at this point depend on your printer driver.
With a typical driver, you may select SETUP . Then select AUTO
SETUP . There will be a series of messages as the Chooser commu-
nicates with the printer and locates the proper PPD. The setup
screen will return, listing the PPD file selected. Select
OK . Then
exit from Chooser.
5.2 Loading the AppleTalk NIManage
Utility Program
The AppleTalk NIManage utility program has the following functions:
• View the names of the printer or printer zone.
• Enable or disable the status report.
• View the error log.
• Enable or disable other protocols and view or modify the TCP/IP
address, subnet mask, and default gateway address.
Use the following procedure to get access to AppleTalk NIManage
utility program:
1.
Insert the CD-ROM into the CD-ROM drive.
2. Double-click the NIC mac icon from the CD-ROM.
3. Click the CD-ROM Contents button to display the Introduction
screen.
4. Click Installation/Configuration Program located at the bottom
of the Introduction screen.
5. Select the NIManage AppleTalk Administration Program item
to start the NIManage program. The Zone and Device screen is
displayed.