Hitachi 19VR11B - Manual (Page 45)

TIMER
45
TIMER
AUTOMATIC TIMER RECORDING
You may set the TV/VCR to record while you are away. You can set 8 programs to
record on a specific day, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE: MAY 6th, 1996
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: LP
PROGRAM NO.: 4
NOTE: You must use the remote control for this procedure.
Make sure...
• Be sure the clock is set to the correct time and date before setting the timer.
• Power must be turned on to set automatic timer recording.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or
fast forward the tape to the point at which you want to begin recording.)
• Preset the tuner.
Avoid over lap of programs...
There is a case that a program will not be performed, when programs overlap;
• The program with the earliest start time has priority.
• When the earliest program has finished and the programs which should start still
overlap, the recording will start in the order of the program number.
• If you programmed as the illustration, the timer recording would be carried out as
follows (shaded part is the recording period):
9:00AM - 10:00AM for PROGRAM 2
10:00AM -
for PROGRAM 1
1 Select "TIMER PROGRAMMING"
Press MENU button to point to "TIMER PROGRAMMING".
Press SELECT button.
• If you did not set the clock, "MANUAL CLOCK SET" appears. If so, follow page
17 to set the clock and repeat from step [3].