Hitachi 19VR11B - Manual (Page 33)

TV OPERATION
33
TEXT mode: You may watch full screen text information if you want by choosing the text
mode.
1/2: You may get these captions or text information by selecting either "1" or "2". "2", when
used, will usually be for a second language.
NOTE:
Not all programs are broadcast with closed captions. Your television is designed to provide error
free closed captions from high quality antenna, cable and VCR signals. Conversely, poor quality
signals are likely to result in caption errors or no captions at all. Common signal conditions which
may cause captions errors are listed below;
a. Automobile ignition noise.
b. Electric motor brush noise.
c. Weak snowy picture.
d. Multiplex signal reception displaying picture ghosts or airplane flutter.
e. Playback of poorly recorded or worn VCR tapes.
f. If the TV/VCR displays a black box on the TV screen, this means that the TV/VCR is set to the
TEXT mode. To clear screen, select [CAPTION1], [CAPTION2] or [OFF
].
Make sure...
• You must use the remote control unit for the following steps.
• Power must be turned on.
1 Select "CAPTION"
Press MENU button repeatedly to point to "CAPTION".
2 Select your desired caption menu
Press CH or button repeatedly until your desired caption menu appears.
([CAPTION1], [CAPTION2], [TEXT1] or [TEXT2])
3 Exit the caption setting mode
Press MENU button repeatedly until the TV/VCR returns to the TV mode.
TO CANCEL THE CLOSED CAPTION SYSTEM
Repeat steps [1] and [2], select [OFF] using CH or button. Press MENU button
repeatedly to return to TV mode.
WHEN THE CLOSED CAPTION MODE IS ON
The On Screen Display will disappear after 5 seconds.
• This is true even if MUTE button is pressed, or PAUSE/STILL button is pressed
while recording. However, On Screen Display will appear for 5 seconds when
SELECT button is pressed.