Hitachi 19VR11B - Manual (Page 37)

SPECIAL PLAYBACK
37
ALL REPEAT: repeat playback from the beginning to the end of the tape.
BLANK REPEAT: repeat playback from the beginning to the blank part, which has
no more than 10 seconds, of recorded information.
NOTE: No buttons except POWER and STOP buttons will work during Repeat
Playback. Always set the Repeat Playback to [OFF] when this function is not being used.
1 Select "USER'S SET UP"
Press MENU button repeatedly to point to "USER'S SET UP".
Then, press SELECT button.
2 Select "ALL" or "BLANK"
Press MENU button repeatedly to point to 'REPEAT PLAY".
Press CH
or button repeatedly until your desired selection [ALL] or [BLANK]
appears.
3 Exit the Repeat Play setting
Press MENU button repeatedly until the TV/VCR returns to the TV mode.
4 Start Playback
Press PLAY button to start the Repeat Play. "REPEAT PLAY " appears.
• Once you select the Repeat Play mode, it stays in effect even after you turn off the
TV/VCR.
• If the Rental mode is set to [ON], the "RENTAL PLAY " display has priority.
TO CANCEL THE REPEAT PLAY MODE
Press STOP button to stop playback. Repeat steps [1], then follow step [2] but select
[OFF]. Press MENU button repeatedly until the TV/VCR returns to the TV mode.