Humax CX-FOX C II - Manual (Page 52)

9. Software Update
GB51
User’s Manual
2. Automatic Update
You can set the product to fi nd the software update site and update software automatically.
1. Press the MENU button.
2. Select Installation using the  /  button and press the OK
or  button.
3. Enter the password using the NUMERIC(0-9) buttons.
4. Select Software Update using the  /  button and press the
OK or  button.
5. Select Automatic Update using the  /  button and press
the OK or  button.
6. Automatically search for new software. Select Stop and press
the OK button to fi nish search.
7. When detecting update software, the following result is
displayed. If new software is not found by Automatic Update,
use Manual Update.
8. Select Yes and press the OK button to start updating. Select
No and press the OK button to return to the previous menu
without updating.
9. When completing the software update, the product is
automatically powered off and on again.