Humax CX-FOX C II - Manual (Page 49)

GB48
User’s Manual
8. Installation
2. Symbol Rate
1. Select Symbol Rate using the  /  button and press the OK
or  button.
2. Select the symbol rate value using the  /  button and press
the OK button.
3. When you select User Defi ne to set symbol rate manually,
enter symbol rate value using the NUMERIC(0-9) buttons.
3. Network Search
1. Select Network Search using the  /  button and press the
OK or  button.
2. Select Enable/Disable using the OK or  button.
Note: Enable allows you to use Network ID.
4. Search
You can complete the setting and start searching.
1. Select Search and press the OK button to start manual search.
2. The next procedures are similar to those for the automatic search. Please refer to 8.1 Automatic
Search.