Humax CX-FOX C II - Manual (Page 47)

GB46
User’s Manual
8. Installation
8.2 Linear Search
You can search channels by setting the range of frequencies and other parameters.
1. Start/End Frequency
1. Select Start/End Frequency using the  /  button and press
the OK or  button.
2. Enter the frequency using the NUMERIC(0-9) buttons.
2. Step
1. Select Step using the  /  button and press the OK or 
button.
2. Select an option among Auto, 250, 1000, 7000 and 8000
using the  /  button and press the OK button. If you do not
know the value, please select Auto. If the required value does
not exist, select User Defi ne and enter the value directly.
3. Network Search
1. Select Network Search using the  /  button and press the
OK or  button.
2. Select an option among Disable, Enable and User Defi ne
using the  /  button and press the OK button.
3. When you select User Defi ne to set the network manually,
enter network value using the NUMERIC(0-9) buttons.