HP Digital mp2210 - Manual (Page 39)

Using the on-screen menu 39
Setup menu
Help menu
Aspect ratio Selects how the picture fits on the screen:
• Best fit automatically fits the picture without stretching it.
• 1-to-1 shows each picture dot as one projected dot.
• Reduced fits a standard-shape picture onto a widescreen projection
screen.
• Fill Fill Fill Fill stretches the picture to fill the screen.
Reset this picture mode Restores the current picture mode to its default settings.
Picture menu (continued)
Setup menu
Language Selects the language used by the on-screen menu.
Timeout for menu Sets how many seconds the on-screen menu waits for input before it closes.
Picture orientation Adjusts the orientation of the picture: upright or upside-down, in front of or
behind the screen. Inverts or reverses the image accordingly.
Lamp saver Sets a lower power level for the lamp.
Power timeout Sets the length of time the projector waits for an input signal before
automatically shutting down.
Clean edges Removes visible noise from the edges of the picture.
Reset lamp hours For a new lamp, resets the hours of use.
Reset all settings Restores all menu settings to factory default settings.
Help
Displays information and status of the projector.
Diagnostics... Show tests for checking the operation of the projector and the remote
control.