Using the on-screen menu, Changing settings using the on-screen menu – HP Digital mp2210 User Manual
Page 36
Adjusting the Projector
36
Using the on-screen menu
Changing settings using the on-screen menu
You can change the on-screen menu settings with the buttons on either the projector or the
remote control.
1.
Press enter on the projector or remote control. This displays the on-screen menu.
2.
Press up or down to highlight the desired menu icon, then press right to move into
that menu.
3.
Press up or down to highlight a setting, then press enter to begin adjusting the
setting.
4.
Press left or right , or press up or down , to adjust the setting, as prompted.
5.
Press enter to return to the menu.
6.
To go to a different menu, press left and select a menu.
7.
To close the on-screen menu, press the exit button.
If you do nothing for a period of time, the on-screen menu closes. To change the amount of
time until the on-screen menu closes, press enter and select Setup > Timeout for menu.
TIP:
To exit from any on-screen menu or adjustment, press the exit button.