Appendix, Remote control code list – Humax IHDR-5200C User Manual
Page 71
70
Remote Control Code List
1. Using the Universal Remote Control
1. Select the mode(PVR, TV, DVD, AUDIO) you want to set by pressing the corresponding button on the
remote control. The button will blink once.
2. Keep pressing the button for 3 seconds until the button lights on.
3. Enter the 3-digit code. Every time a number is entered, the button will blink. When the third digit is
entered, the button will blink twice.
4. If a valid 3-digit code is entered, the product will power off.
5. Press
the
OK button and the mode button will blink three times. The setup is complete.
6. If the product does not power off, repeat the instruction from 3 to 5.
Note:
•
When no code is entered for one minute the universal setting mode will switch to normal mode.
•
Try several setting codes and select the code that has the most functions.
Remote Control Function List
The keys on the remote control function as in the list below.
Note: Some keys may not function depending on the product.
Button
TV DVD
AUDIO
STANDBY
POWER
POWER
POWER
MUTE
MUTE
MUTE
PVR
TV
DVD
AUDIO
1
DIGIT 1
1
INPUT 1
2
DIGIT 2
2
INPUT 2
3
DIGIT 3
3
INPUT 3
4
DIGIT 4
4
INPUT 4
5
DIGIT 5
5
INPUT 5
6
DIGIT 6
6
INPUT 6
7
DIGIT 7
7
INPUT 7
8
DIGIT 8
8
INPUT 8
9
DIGIT 9
9
INPUT 9
0
DIGIT 0, 11
0
INPUT 0
TV Portal
MENU
MENU
MENU
MENU/MODE
Appendix