Humax IHDR-5200C - Manual (Page 53)

52
Menu On/Off Select Confirm Enter 0~9
In this chapter you can configure the installation setting and perform the channel search.
MENU Settings Installation
You will be prompted to enter the password to access this menu.
Note:
•
The default password is 0000. If you have forgotten your password, please contact your local
distributor.
• Press the MENU or EXIT button to exit. Press the BACK button to return to the previous screen.
Channel Search
If your product is connected to the cable and TV, you can search channels manually by searching
parameters, if you know the MUX information.
1. Select Channel Search.
2. Configure the search options.
Frequency: Enter the frequency.
Network
ID: Enter the network ID.
Symbol Rate: Enter the symbol rate.
3. Select Search and press the OK button. The
found channels will be listed.
4. When the search has completed, select Save
and press the OK button to save the found
channels.
Note:
• Select
User Define to enter options directly.
• Select Stop and press the OK button to stop the channel search.
Installation