Harbor Freight Tools 55167 - Manual (Page 3)

For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
Page 3 SKU 55167
SPECIFICATIONS
Welding Current 63 ~ 68 amps; High setting: 79 ~ 90 amps
Duty Cycle
10% at 80 amps; 18% at 60 amps
(See explanation of Duty Cycle on page 15.)
Power Consumption
120 VAC, 24 amps peak, single phase
Should be connected to a 20 amp minimum dedicated circuit
Heat Control 2 settings
Ground Cable 6 AWG, 6 foot
Torch Power Cable 8 AWG, 6 foot
Power Cord 3-wire, 14 AWG, UL listed
Welder Tip
Included tips will accept 0.030 ” flux core wire
(0.9 mm tips, to account for thermal expansion of the wire)
Wire Size 0.030” flux core wire
Wire Spool Size 4” diameter/ 2 lb. spool
Overall Dimensions 14-1/2 (L) x 8-1/2 (W) x 15-1/2 (H) inches
Weight 34.45 lb.
Accessories
Spare Welder Tip 0.9mm (for .030” wire)
Welding Face Shield
Wire Brush / Hammer combination
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions
listed below may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Work Area
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.