HONDA FL5540K1 - Manual (Page 26)

FRONT LOADER ASSEMBLY
LOADER STAND REMOVAL
14. Raise the loader with the loader control
until the stands clear the ground.
Remove latch pin from the stands and
remove the stands.
16. Align the hole in the bottom of the stand
with the mounting hook at rear of
mainframe. Slide the stand over the
mounting hook and then insert the latch
pin previously removed through main
frame and through the stand. Repeat the
above steps for the other side. Lower the
loader to the ground.
Front Loader is ready to become operational.
MOUNTING HOOK
24