HONDA FL5540K1 - Manual (Page 24)

FRONT LOADER ASSEMBLY
BUCKET ATTACHING
10. Using the bottom holes on the bucket,
attach both sides of bucket to loader
frame. Use two each x 3 inch pins and
clip pins.
Attach both cylinders to top holes on
bucket. Use two each 3/4 x 3 inch pins
and clip pins.
The loader is now ready for hydraulic fluid.
3/4 x 3in PINS
BUCKET LEVEL INDICATOR INSTALLATION
1 1. On the inside of the left side of the mainframe,
remove the top thrust washer and secure the
top of the bucket level indicator with a cotter
pin.
12. Remove the bottom thrust washer and se-
cure the bottom of the bucket level indicator
with a clip
pin.
22