HONDA FL5540K1 User Manual

Page 22

FRONT LOADER ASSEMBLY

PRESSURE and SUCTION HYDRAULIC HOSE
CONNECTION

Remove the pipe plug from

body

and clean the threads and then install the
pressure hose. Remove the plastic caps
from the pump outlets. Use sealer on

threads and screw the other end (swivel
connector end) into the threaded pipe
fitting on the pump. Slide the suction hose

(large hose) over the pipe end at the
bottom of

and pipe end on

the pump. Attach with hose clamps and

tighten securely.

Attach the front guard on the front of the
sub-frame using two each

inch and

inch bolts, and four each

inch nuts and washers.

Do not tighten

bolts at this time.

ATTACHING LOADING MASTS

Move the tractor until the masts are
positioned over the upright pads on the

sub-frame, use two people to lower the

masts onto the pads and insert the fixing
pins through the masts and pads. Install

clip pins to retain fixing pins.

Masts may have to be shaken to align fixing
pin holes.

ESSURE

HOSE

CLAM

PUMP

SUCTION

HOSE

CLIP PIN

FIXING PIN