HONDA FL5540K1 - Manual (Page 39)

LOADER INSTALLATION
LOADER INSTALLATION
Install the sub-frame and rear weight box.
(pages 1 3- 1 8 )
The sub-frame, masts and main frame are
assembled. All cylinders and hoses are
attached to the loader frame and hydraulic
1. Move the tractor centrally between the
masts.
2. Mount hydraulic pump to tractor by sliding
splined pump drive joint onto front PTO
shaft with mounting brackets inside main
frame and attaching with four 5/16
x 7/8
inch bolts.
the 3. Attach the front on the front o
sub-frame using each 1/2 x 1 inch and
1/2 x 1 5/16 inch bolts, and four each 1/2
inch nuts and washers. Tighten bolts and
nuts.
Torque: 76 ft-lb (1 03 Nm)