HP PHOTOSMART 930 - Manual (Page 81)

Chapter 7: Troubleshooting and support 81
My image is
blurry. The camera
was set to
Normal focus
when it should
have been set
to
Macro
focus, or vice
versa.
Set the camera to Macro focus
or to Normal focus, and try
taking the picture again. (See
Setting the focus range on
page 30.)
You moved the
camera while
you took the
picture. Hold the camera steady as you
press the
Shutter button or use
a tripod.
The light is low
and the flash
is set to
Flash
Off .
In dim light, the camera requires
a longer exposure. Use a tripod
to hold the camera steady,
improve lighting conditions, or set
the flash to
Flash On (see
page 33).
The camera
focused on the
wrong thing, or
was unable to
focus. Use Focus Lock . (See Using focus
lock on page 27.)
My image is
too bright. The flash
provided too
much light. Use the Flash Off setting (see
page 33).
You were too
close to the
subject to use
the flash. Move back from the subject or use
the
Flash Off setting (see
page 33), and take the picture
again.
Problem Possible cause Solution