Taking self-timer pictures – HP PHOTOSMART 930 User Manual
Page 25
Chapter 2: Taking pictures and recording video clips
25
NOTE
If you have set
Self-Timer
to
On
or
On - 2 shots
in the
Capture
menu (see page 38), the camera will start
recording 10 seconds after you press the
Video
button.
However, with the
On - 2 shots
setting, the camera only
records one video clip.
The camera automatically stops recording when the maximum
video clip length of approximately 2 minutes is reached, or the
memory card is full, whichever comes first. After recording has
stopped, the first frame of the video clip and
Processing...
appear on the Image Display. While it is processing, you can
delete the video clip by pressing the
OK
button.
You can use
Playback
to review the video clips you have taken.
See
Taking self-timer pictures
You can also take still pictures using the
Self-Timer
settings in
the
Capture
menu.
1
Set
Self-Timer
to either
On
or
On - 2 shots
in the
Capture
on page 36, and then
see
2
Secure the camera to a tripod or set it on a stable surface.
3
Frame the subject for your picture in the viewfinder.
4
Press the
Shutter
button halfway down. The camera
measures and then locks the focus and exposure. The
camera will hold these settings for the 10 seconds until it
takes the picture.
NOTE
If you immediately press the
Shutter
button all the way
down instead, the camera locks focus and exposure just
before the end of the 10-second countdown. This is useful
when one or more subjects will be entering the picture
during the 10-second countdown period.